From 8be1017d4abd2de2f67e3eac856991ded85e6d6d Mon Sep 17 00:00:00 2001
From: manuel <manuel@mausz.at>
Date: Wed, 22 Oct 2025 21:08:52 +0200
Subject: rename printer switch config

---
 esphome/config/pswitch.yaml | 172 --------------------------------------------
 1 file changed, 172 deletions(-)
 delete mode 100644 esphome/config/pswitch.yaml

(limited to 'esphome/config/pswitch.yaml')

diff --git a/esphome/config/pswitch.yaml b/esphome/config/pswitch.yaml
deleted file mode 100644
index 3b361e1..0000000
--- a/esphome/config/pswitch.yaml
+++ /dev/null
@@ -1,172 +0,0 @@
-substitutions:
-  device_name: pswitch
-  friendly_name: "Printer Switch"
-  current_resistor: 0.0007978220592127652
-  voltage_divider: 4422.084168336673
-  # max power is 3450W for 15A and 2300W for 10A
-  max_power: "3450"
-
-esphome:
-  name: ${device_name}
-  friendly_name: ${friendly_name}
-
-esp8266:
-  board: esp01_1m
-
-# Enable logging
-logger:
-  # make RXD / TXD available
-  baud_rate: 0
-  level: DEBUG
-
-# Enable Home Assistant API
-api:
-  encryption:
-    key: !secret api_encryption_key
-
-# OTA
-ota:
-  - platform: esphome
-    password: !secret ota_password
-
-# WiFi Credentials
-wifi:
-  domain: .lan
-  ssid: !secret wifi_ssid
-  password: !secret wifi_password
-  # see https://github.com/esphome/issues/issues/1532
-  power_save_mode: HIGH
-
-  # Enable fallback hotspot (captive portal) in case wifi connection fails
-  ap:
-    ssid: "${device_name} Hotspot"
-    password: !secret wifi_ap_password
-
-captive_portal:
-
-binary_sensor:
-  - platform: gpio
-    name: "Button"
-    device_class: power
-    pin:
-      number: GPIO01
-      inverted: true
-    on_press:
-      - switch.toggle: relay
-    internal: true
-
-sensor:
-  - platform: hlw8012
-    model: BL0937
-    sel_pin: GPIO12
-    cf_pin: GPIO04
-    cf1_pin: GPIO05
-    current_resistor: ${current_resistor}
-    voltage_divider: ${voltage_divider}
-    voltage:
-      id: voltage
-      filters:
-        - skip_initial: 2
-    power:
-      id: power
-      internal: true
-      filters:
-        - skip_initial: 2
-      on_value:
-        then:
-          # calculate current through P=U*I
-          - lambda: id(current).publish_state(x / id(voltage).state);
-          # idle power down. <5W
-          - if:
-              condition:
-                for:
-                  time: 5min
-                  condition:
-                    and:
-                      - switch.is_on: relay
-                      - lambda: return id(power).state < 5.0;
-              then:
-                - logger.log: "idle power down"
-                - switch.turn_off: relay
-      on_value_range:
-        - above: ${max_power}
-          then:
-            - switch.turn_off: relay
-    energy:
-      id: energy
-      internal: true
-    update_interval: 1s
-    initial_mode: "VOLTAGE"
-    change_mode_every: never
-
-  - platform: template
-    id: current
-    accuracy_decimals: 3
-    update_interval: never
-    internal: true
-
-    # templates sensors for the ui. we only update the sensor on relay events or through interval
-    # but only if switch is on. this way we don't push updates without changes to frontend
-  - platform: template
-    name: "Current"
-    id: current_ui
-    unit_of_measurement: "A"
-    accuracy_decimals: 3
-    icon: "mdi:flash-outline"
-    update_interval: never
-
-  - platform: template
-    name: "Voltage"
-    id: voltage_ui
-    unit_of_measurement: "V"
-    icon: "mdi:flash-outline"
-    update_interval: never
-
-  - platform: template
-    name: "Power"
-    id: power_ui
-    unit_of_measurement: "W"
-    icon: "mdi:flash-outline"
-    update_interval: never
-
-  - platform: template
-    name: "Energy"
-    id: energy_ui
-    unit_of_measurement: "Wh"
-    icon: "mdi:flash-outline"
-    update_interval: never
-
-switch:
-  - platform: gpio
-    name: "Relay"
-    id: relay
-    pin: GPIO14
-    on_turn_on:
-      - output.turn_on: led
-      - lambda: id(current_ui).publish_state(id(current).state);
-      - lambda: id(voltage_ui).publish_state(id(voltage).state);
-      - lambda: id(power_ui).publish_state(id(power).state);
-      - lambda: id(energy_ui).publish_state(id(energy).state);
-    on_turn_off:
-      - output.turn_off: led
-      - lambda: id(current_ui).publish_state(0.0);
-      - lambda: id(voltage_ui).publish_state(0.0);
-      - lambda: id(power_ui).publish_state(0.0);
-      - lambda: id(energy_ui).publish_state(0.0);
-
-output:
-  - platform: esp8266_pwm
-    id: led
-    pin: GPIO13
-
-interval:
-  - interval: 10s
-    then:
-      - if:
-          condition:
-            switch.is_on: relay
-          then:
-            - lambda: id(current_ui).publish_state(id(current).state);
-            - lambda: id(voltage_ui).publish_state(id(voltage).state);
-            - lambda: id(power_ui).publish_state(id(power).state);
-            - lambda: id(energy_ui).publish_state(id(energy).state);
-- 
cgit v1.2.3