sync with upstream

28 files changed, 0 insertions, 994 deletions

diff --git a/project/cmake/addons/CMakeLists.txt b/project/cmake/addons/CMakeLists.txt
deleted file mode 100644
index 96e544b..0000000
--- a/project/cmake/addons/CMakeLists.txt
+++ /dev/null
@@ -1,434 +0,0 @@
-cmake_minimum_required(VERSION 3.1)
-project(kodi-addons)
-
-list(APPEND CMAKE_MODULE_PATH ${PROJECT_SOURCE_DIR})
-
-option(ADDON_TARBALL_CACHING "Cache downloaded addon source tarballs?" ON)
-if(ADDON_TARBALL_CACHING)
-  message(STATUS "Addon source tarball caching is enabled")
-else()
-  message(STATUS "Addon source tarball caching is disabled")
-endif()
-
-if(NOT CMAKE_BUILD_TYPE)
-  set(CMAKE_BUILD_TYPE Release)
-endif()
-
-if(NOT CORE_SYSTEM_NAME)
-  if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
-    set(CORE_SYSTEM_NAME "osx")
-  else()
-    string(TOLOWER ${CMAKE_SYSTEM_NAME} CORE_SYSTEM_NAME)
-  endif()
-endif()
-
-include(ExternalProject)
-
-### setup all the necessary paths
-if(APP_ROOT)
-  set(CORE_SOURCE_DIR ${APP_ROOT})
-  unset(APP_ROOT)
-  message(WARNING "APP_ROOT is deprecated. Please use CORE_SOURCE_DIR instead.")
-endif()
-if(NOT CORE_SOURCE_DIR)
-  set(CORE_SOURCE_DIR ${PROJECT_SOURCE_DIR}/../../..)
-else()
-  file(TO_CMAKE_PATH "${CORE_SOURCE_DIR}" CORE_SOURCE_DIR)
-endif()
-get_filename_component(CORE_SOURCE_DIR "${CORE_SOURCE_DIR}" ABSOLUTE)
-
-if(NOT BUILD_DIR)
-  set(BUILD_DIR "${CMAKE_BINARY_DIR}/build")
-else()
-  file(TO_CMAKE_PATH "${BUILD_DIR}" BUILD_DIR)
-endif()
-get_filename_component(BUILD_DIR "${BUILD_DIR}" ABSOLUTE)
-
-if(NOT ADDON_DEPENDS_PATH)
-  set(ADDON_DEPENDS_PATH "${BUILD_DIR}/depends")
-else()
-  file(TO_CMAKE_PATH "${ADDON_DEPENDS_PATH}" ADDON_DEPENDS_PATH)
-endif()
-get_filename_component(ADDON_DEPENDS_PATH "${ADDON_DEPENDS_PATH}" ABSOLUTE)
-
-if(NOT PLATFORM_DIR)
-  set(PLATFORM_DIR ${CORE_SOURCE_DIR}/project/cmake/platform/${CORE_SYSTEM_NAME})
-  file(TO_CMAKE_PATH "${PLATFORM_DIR}" PLATFORM_DIR)
-endif()
-
-# make sure CMAKE_PREFIX_PATH is set
-if(NOT CMAKE_PREFIX_PATH)
-  set(CMAKE_PREFIX_PATH "${ADDON_DEPENDS_PATH}")
-else()
-  file(TO_CMAKE_PATH "${CMAKE_PREFIX_PATH}" CMAKE_PREFIX_PATH)
-  list(APPEND CMAKE_PREFIX_PATH "${ADDON_DEPENDS_PATH}")
-endif()
-
-# check for autoconf stuff to pass on
-if(AUTOCONF_FILES)
-  string(REPLACE " " ";" AUTOCONF_FILES ${AUTOCONF_FILES})
-  set(CROSS_AUTOCONF "yes")
-endif()
-
-if(CMAKE_INSTALL_PREFIX_INITIALIZED_TO_DEFAULT OR NOT CMAKE_INSTALL_PREFIX)
-  set(CMAKE_INSTALL_PREFIX "${PROJECT_SOURCE_DIR}/output/addons")
-endif()
-list(APPEND CMAKE_PREFIX_PATH ${CMAKE_INSTALL_PREFIX})
-
-set(BUILD_ARGS -DCMAKE_PREFIX_PATH=${CMAKE_PREFIX_PATH}
-               -DCMAKE_INSTALL_PREFIX:PATH=<INSTALL_DIR>
-               -DPACKAGE_CONFIG_PATH=${ADDON_DEPENDS_PATH}/lib/pkgconfig
-               -DADDON_DEPENDS_PATH=${ADDON_DEPENDS_PATH}
-               -DOVERRIDE_PATHS=${OVERRIDE_PATHS}
-               -DCMAKE_BUILD_TYPE=${CMAKE_BUILD_TYPE}
-               -DCMAKE_USER_MAKE_RULES_OVERRIDE=${CMAKE_USER_MAKE_RULES_OVERRIDE}
-               -DCMAKE_USER_MAKE_RULES_OVERRIDE_CXX=${CMAKE_USER_MAKE_RULES_OVERRIDE_CXX}
-               -DCORE_SYSTEM_NAME=${CORE_SYSTEM_NAME}
-               -DBUILD_SHARED_LIBS=1
-               -DCMAKE_C_FLAGS=${CMAKE_C_FLAGS}
-               -DCMAKE_CXX_FLAGS=${CMAKE_CXX_FLAGS})
-
-if(MSVC)
-  # move cmake specific targets to a CMakePredefinedTargets folder in Visual Studio
-  set_property(GLOBAL PROPERTY USE_FOLDERS ON)
-endif()
-
-option(PACKAGE_ZIP "Prepare built addons for packaging" OFF)
-if(PACKAGE_ZIP)
-  # needed for project installing
-  list(APPEND BUILD_ARGS -DPACKAGE_ZIP=ON)
-
-  # figure out where to store the packaged ZIP archives
-  if(NOT PACKAGE_DIR)
-    set(PACKAGE_DIR "${BUILD_DIR}/zips")
-  else()
-    file(TO_CMAKE_PATH "${PACKAGE_DIR}" PACKAGE_DIR)
-  endif()
-  list(APPEND BUILD_ARGS -DPACKAGE_DIR=${PACKAGE_DIR})
-
-  message(STATUS "ZIP packaging enabled (destination: ${PACKAGE_DIR})")
-endif()
-
-if(CMAKE_TOOLCHAIN_FILE)
-  list(APPEND BUILD_ARGS -DCMAKE_TOOLCHAIN_FILE=${CMAKE_TOOLCHAIN_FILE})
-  message(STATUS "Toolchain specified")
-  message(STATUS ${BUILD_ARGS})
-endif()
-
-if(NOT ADDONS_TO_BUILD)
-  set(ADDONS_TO_BUILD "all")
-else()
-  string(STRIP "${ADDONS_TO_BUILD}" ADDONS_TO_BUILD)
-  message(STATUS "Building following addons: ${ADDONS_TO_BUILD}")
-  string(REPLACE " " ";" ADDONS_TO_BUILD ${ADDONS_TO_BUILD})
-endif()
-
-if(NOT ADDONS_DEFINITION_DIR)
-  set(ADDONS_DEFINITION_DIR ${PROJECT_SOURCE_DIR}/addons)
-else()
-  file(TO_CMAKE_PATH "${ADDONS_DEFINITION_DIR}" ADDONS_DEFINITION_DIR)
-endif()
-get_filename_component(ADDONS_DEFINITION_DIR "${ADDONS_DEFINITION_DIR}" ABSOLUTE)
-
-if(ADDON_SRC_PREFIX)
-  if(NOT IS_ABSOLUTE ${ADDON_SRC_PREFIX})
-    get_filename_component(ADDON_SRC_PREFIX "${CMAKE_BINARY_DIR}/${ADDON_SRC_PREFIX}" ABSOLUTE)
-  endif()
-  message(STATUS "Overriding addon source directory prefix: ${ADDON_SRC_PREFIX}")
-endif()
-
-if(NOT APP_LIB_DIR)
-  set(APP_LIB_DIR "${ADDON_DEPENDS_PATH}/lib/kodi")
-else()
-  file(TO_CMAKE_PATH "${APP_LIB_DIR}" APP_LIB_DIR)
-endif()
-
-set(APP_PREFIX "${CMAKE_INSTALL_PREFIX}")
-
-# check for platform specific stuff
-if(EXISTS ${PLATFORM_DIR}/defines.txt)
-  file(STRINGS ${PLATFORM_DIR}/defines.txt platformdefines)
-
-  if(NOT ARCH_DEFINES AND platformdefines)
-    set(ARCH_DEFINES ${platformdefines})
-  endif()
-endif()
-
-# include check_target_platform() function
-include(${CORE_SOURCE_DIR}/project/cmake/scripts/common/CheckTargetPlatform.cmake)
-
-set(ADDON_INSTALL_DIR ${CMAKE_INSTALL_PREFIX})
-if(NOT WIN32)
-  # check install permissions
-  check_install_permissions(${CMAKE_INSTALL_PREFIX} can_write)
-  if(NOT ${can_write} AND CMAKE_SYSTEM_NAME STREQUAL "Linux")
-    set(NEED_SUDO TRUE)
-    set(ADDON_INSTALL_DIR ${CMAKE_BINARY_DIR}/.install)
-    list(APPEND BUILD_ARGS -DOVERRIDE_PATHS=ON)
-    message(STATUS "NEED_SUDO: ${NEED_SUDO} (no write permission for ${CMAKE_INSTALL_PREFIX})")
-  endif()
-endif()
-
-### prepare the build environment for the binary addons
-# copy the PrepareEnv.cmake script to the depends path so that we can include it
-file(COPY ${CORE_SOURCE_DIR}/project/cmake/scripts/common/PrepareEnv.cmake DESTINATION ${APP_LIB_DIR})
-
-# add the location of PrepareEnv.cmake to CMAKE_MODULE_PATH so that it is found
-list(APPEND CMAKE_MODULE_PATH ${APP_LIB_DIR})
-
-# include PrepareEnv.cmake which contains the logic to install the addon header bindings etc
-include(PrepareEnv)
-
-### add the depends subdirectory for any general dependencies
-message(STATUS "\n-- ---- Preparing general dependencies ----")
-add_subdirectory(depends)
-
-# add a custom target "package-addons" which will package and install all addons
-add_custom_target(package-addons)
-
-### get and build all the binary addons
-# look for all the addons to be built
-file(GLOB_RECURSE addons ${ADDONS_DEFINITION_DIR}/*.txt)
-
-#if there are no addons assume that bootstrapping hasn't happened yet
-if(NOT addons)
-  message(STATUS "Bootstrapping all default repositories as no addons were found...")
-  set(BOOTSTRAP_BUILD_DIR "${BUILD_DIR}/bootstrap")
-
-  # make sure that the bootstraps build addon exists
-  if(NOT EXISTS ${BOOTSTRAP_BUILD_DIR})
-    file(MAKE_DIRECTORY ${BOOTSTRAP_BUILD_DIR})
-  endif()
-
-  string(REPLACE ";" " " ADDONS_TO_BUILD_STR "${ADDONS_TO_BUILD}")
-  # generate the bootstrap buildsystem
-  execute_process(COMMAND ${CMAKE_COMMAND} ${PROJECT_SOURCE_DIR}/bootstrap
-                                           -DCMAKE_INSTALL_PREFIX:PATH=${ADDONS_DEFINITION_DIR}
-                                           -DBUILD_DIR:PATH=${BOOTSTRAP_BUILD_DIR}
-                                           -DADDONS_TO_BUILD:STRING=${ADDONS_TO_BUILD_STR}
-                                           -DCMAKE_TOOLCHAIN_FILE=${CMAKE_TOOLCHAIN_FILE}
-                  WORKING_DIRECTORY ${BOOTSTRAP_BUILD_DIR})
-
-  # execute the generated bootstrap buildsystem
-  execute_process(COMMAND ${CMAKE_COMMAND} --build ${BOOTSTRAP_BUILD_DIR}
-                  WORKING_DIRECTORY ${BOOTSTRAP_BUILD_DIR})
-
-  # now look for all the addons to be built again
-  file(GLOB_RECURSE addons ${ADDONS_DEFINITION_DIR}/*.txt)
-
-  if(NOT addons)
-    message(FATAL_ERROR "No addons available to be built")
-  endif()
-endif()
-
-# Track if at least one addon has been found. Everything else is likely an
-# error either in ADDONS_TO_BUILD or in the directory configuration.
-set(SUPPORTED_ADDON_FOUND FALSE)
-
-foreach(addon ${addons})
-  if(NOT (addon MATCHES platforms.txt))
-    file(STRINGS ${addon} def)
-    string(REPLACE " " ";" def ${def})
-    list(GET def 0 id)
-
-    set(ADDON_FOUND FALSE)
-    # try to find a perfect match
-    list(FIND ADDONS_TO_BUILD ${id} idx)
-    if(idx GREATER -1 OR "${ADDONS_TO_BUILD}" STREQUAL "all")
-      set(ADDON_FOUND TRUE)
-    # Maybe we have a regex
-    elseif(id MATCHES "${ADDONS_TO_BUILD}")
-      message(STATUS "Pattern ${ADDONS_TO_BUILD} matches ${id}, building addon")
-      set(ADDON_FOUND TRUE)
-    endif()
-
-    if(ADDON_FOUND)
-      message(STATUS "\n-- ---- Configuring addon ${addon} ----")
-      set(SUPPORTED_ADDON_FOUND TRUE)
-
-      get_filename_component(dir ${addon} DIRECTORY)
-
-      # check if the addon has a platforms.txt
-      set(platform_found FALSE)
-      check_target_platform(${dir} ${CORE_SYSTEM_NAME} platform_found)
-
-      if(${platform_found})
-        # make sure the output directory is clean
-        file(REMOVE_RECURSE "${CMAKE_INSTALL_PREFIX}/${id}/")
-
-        # get the URL and revision of the addon
-        list(LENGTH def deflength)
-        list(GET def 1 url)
-
-        set(archive_name ${id})
-        if(ADDON_SRC_PREFIX)
-          set(SOURCE_DIR ${ADDON_SRC_PREFIX}/${id})
-          set(archive_name "")
-        else()
-          set(SOURCE_DIR "")
-        endif()
-
-        # if there is a 3rd parameter in the file, we consider it a git revision
-        if(deflength GREATER 2 AND "${SOURCE_DIR}" STREQUAL "")
-          list(GET def 2 revision)
-
-          # we need access to a git executable
-          find_package(Git REQUIRED)
-
-          # resolve revision to git hash
-          execute_process(COMMAND ${GIT_EXECUTABLE} ls-remote ${url} ${revision} OUTPUT_VARIABLE revision_hash)
-          # git ls-remote only works on branches and tag names but not on revisions
-          if(NOT "${revision_hash}" STREQUAL "")
-            string(REPLACE "\t" ";" revision_list ${revision_hash})
-            list(GET revision_list 0 revision_hash)
-            message(STATUS "${id}: git branch/tag ${revision} resolved to hash: ${revision_hash}")
-            set(revision ${revision_hash})
-          endif()
-
-          # Note: downloading specific revisions via http in the format below is probably github specific
-          # if we ever use other repositories, this might need adapting
-          set(url ${url}/archive/${revision}.tar.gz)
-          set(archive_name ${archive_name}-${revision})
-        elseif("${SOURCE_DIR}" STREQUAL "")
-          # check if the URL starts with file://
-          string(REGEX MATCH "^file://.*$" local_url "${url}")
-
-          #if not we assume this to be a local directory
-          if(local_url)
-            # this is not an archive
-            set(archive_name "")
-
-            # remove the file:// protocol from the URL
-            string(REPLACE "file://" "" SOURCE_DIR "${url}")
-
-            # on win32 we may have to remove another leading /
-            if(WIN32)
-              # check if the path is a local path
-              string(REGEX MATCH "^/.*$" local_path "${SOURCE_DIR}")
-              if(local_path)
-                string(SUBSTRING "${SOURCE_DIR}" 1 -1 SOURCE_DIR)
-              endif()
-            endif()
-          endif()
-        endif()
-
-        # download the addon if necessary
-        if(NOT "${archive_name}" STREQUAL "")
-          # download and extract the addon
-          if(NOT ADDON_TARBALL_CACHING OR NOT EXISTS ${BUILD_DIR}/download/${archive_name}.tar.gz)
-            # cleanup any of the previously downloaded archives of this addon
-            file(GLOB archives "${BUILD_DIR}/download/${id}*.tar.gz")
-            if(archives)
-              message(STATUS "Removing old archives of ${id}: ${archives}")
-              file(REMOVE ${archives})
-            endif()
-
-            # download the addon
-            file(DOWNLOAD "${url}" "${BUILD_DIR}/download/${archive_name}.tar.gz" STATUS dlstatus LOG dllog SHOW_PROGRESS)
-            list(GET dlstatus 0 retcode)
-            if(NOT ${retcode} EQUAL 0)
-              message(FATAL_ERROR "ERROR downloading ${url} - status: ${dlstatus} log: ${dllog}")
-            endif()
-          endif()
-
-          # remove any previously extracted version of the addon
-          file(REMOVE_RECURSE "${BUILD_DIR}/${id}")
-
-          # extract the addon from the archive
-          execute_process(COMMAND ${CMAKE_COMMAND} -E tar xzvf ${BUILD_DIR}/download/${archive_name}.tar.gz
-                          WORKING_DIRECTORY ${BUILD_DIR})
-          file(GLOB extract_dir "${BUILD_DIR}/${archive_name}*")
-          if(extract_dir STREQUAL "")
-            message(FATAL_ERROR "${id}: error extracting ${BUILD_DIR}/download/${archive_name}.tar.gz")
-          else()
-            file(RENAME "${extract_dir}" "${BUILD_DIR}/${id}")
-          endif()
-
-          set(SOURCE_DIR ${BUILD_DIR}/${id})
-        endif()
-
-        if(NOT "${SOURCE_DIR}" STREQUAL "" AND EXISTS ${SOURCE_DIR})
-          # create a list of addons we are building
-          list(APPEND ALL_ADDONS_BUILDING ${id})
-
-          # setup the buildsystem for the addon
-          externalproject_add(${id}
-                              SOURCE_DIR ${SOURCE_DIR}
-                              INSTALL_DIR ${ADDON_INSTALL_DIR}
-                              CMAKE_ARGS ${BUILD_ARGS})
-
-          # add a custom step to the external project between the configure and the build step which will always
-          # be executed and therefore forces a re-build of all changed files
-          externalproject_add_step(${id} forcebuild
-                                   COMMAND ${CMAKE_COMMAND} -E echo "Force build of ${id}"
-                                   DEPENDEES configure
-                                   DEPENDERS build
-                                   ALWAYS 1)
-
-          # add "kodi-platform" as a dependency to every addon
-          add_dependencies(${id} kodi-platform)
-
-          set(${id}_DEPENDS_DIR ${SOURCE_DIR}/depends)
-
-          if(EXISTS ${${id}_DEPENDS_DIR})
-            include(${CORE_SOURCE_DIR}/project/cmake/scripts/common/HandleDepends.cmake)
-            add_addon_depends(${id} ${${id}_DEPENDS_DIR})
-            if(${id}_DEPS AND NOT "${${id}_DEPS}" STREQUAL "")
-              message(STATUS "${id} DEPENDENCIES: ${${id}_DEPS}")
-              add_dependencies(${id} ${${id}_DEPS})
-            endif()
-          endif()
-
-          if(CROSS_AUTOCONF AND AUTOCONF_FILES)
-            if(EXISTS ${SOURCE_DIR}/bootstrap/autoreconf.txt)
-              file(STRINGS ${SOURCE_DIR}/bootstrap/autoreconf.txt conf_dirs)
-              foreach(conf_dir ${conf_dirs})
-                foreach(afile ${AUTOCONF_FILES})
-                  message(STATUS "copying ${afile} to ${SOURCE_DIR}/${conf_dir}")
-                  file(COPY ${afile} DESTINATION ${SOURCE_DIR}/${conf_dir})
-                endforeach()
-              endforeach()
-            endif()
-          endif()
-
-          # create a forwarding target to the addon-package target
-          add_custom_target(package-${id}
-                    COMMAND ${CMAKE_COMMAND} --build ${id}-prefix/src/${id}-build --target addon-package
-                    DEPENDS ${id})
-          add_dependencies(package-addons package-${id})
-
-        else()
-          message(FATAL_ERROR "${id}: invalid or missing addon source directory at ${SOURCE_DIR}")
-        endif()
-      else()
-        # add a dummy target for addons that are unsupported on this platform
-        add_custom_target(${id} COMMAND ${CMAKE_COMMAND} -E echo "IGNORED ${id} - not supported on ${CORE_SYSTEM_NAME}\n")
-      endif()
-    endif()
-  endif()
-endforeach()
-message(STATUS "")
-
-if(NEED_SUDO)
-  add_custom_target(sudo-install
-                    COMMAND ${CMAKE_COMMAND} -E echo "sudo rights needed to install to ${CMAKE_INSTALL_PREFIX}\n"
-                    COMMAND sudo ${CMAKE_COMMAND} -E copy_directory ${ADDON_INSTALL_DIR}/ ${CMAKE_INSTALL_PREFIX}/
-                    COMMAND sudo -k)
-
-  foreach(_id ${ALL_ADDONS_BUILDING})
-    add_dependencies(sudo-install ${_id})
-  endforeach()
-  message(WARNING "sudo rights needed to install to ${CMAKE_INSTALL_PREFIX}")
-  message(STATUS "\nplease type \"make sudo-install\"\n\n")
-endif()
-
-if(NOT SUPPORTED_ADDON_FOUND)
-  message(FATAL_ERROR "${ADDONS_TO_BUILD} did not match any of the supported addons. \
-                       A list of supported addons can be viewed by building the 'supported_addons' target. \
-                       Addon definitions are loaded from ADDONS_DEFINITION_DIR (${ADDONS_DEFINITION_DIR}).")
-endif()
-
-# add custom target "supported_addons" that returns all addons that are supported on this platform
-string(REPLACE ";" " " ALL_ADDONS_BUILDING "${ALL_ADDONS_BUILDING}")
-add_custom_target(supported_addons COMMAND ${CMAKE_COMMAND} -E echo "ALL_ADDONS_BUILDING: ${ALL_ADDONS_BUILDING}" VERBATIM)
-add_custom_target(need-sudo COMMAND ${CMAKE_COMMAND} -E echo ${NEED_SUDO} VERBATIM)
diff --git a/project/cmake/addons/README.md b/project/cmake/addons/README.md
deleted file mode 100644
index 6470ee1..0000000
--- a/project/cmake/addons/README.md
+++ /dev/null
@@ -1,65 +0,0 @@
-![Kodi logo](https://raw.githubusercontent.com/xbmc/xbmc-forum/master/xbmc/images/logo-sbs-black.png)
-# Kodi add-ons CMake based buildsystem
-This directory contains the cmake-based buildsystem for Kodi add-ons. It looks into the directory pointed to by the *ADDONS_DEFINITION_DIR* option (which defaults to the *addons* sub-directory) and parses all *.txt files recursively. Each add-on must have its own `<addon-id>.txt` file in a separate sub-directory that must follow one of the defined formats:
-
-  - `<addon-id> <git-url> <git-revision>`
-  - `<addon-id> <tarball-url>`
-  - `<addon-id> <file://path>`
- 
-where
-- `<addon-id>` must be identical to the add-on's ID as defined in the add-on's addon.xml
-- `<git-url>` must be the URL of the git repository containing the add-on
-- `<git-revision>` must be a valid git tag/branch/commit in the add-on's git repository which will be used for the build
-- `<tarball-url>` must be the URL to a .tar.gz tarball containing the add-on
-- `<file://path>` must be a *file://* based path to the directory containing the add-on
-
-## Reserved filenames
-- **platforms.txt**
-
-List of platforms to build an add-on for (or *all*). Negating platforms is supported using a leading exclamation mark, e.g. *!windows*.
-
-Available platforms are: linux, windows, osx, ios, android, rbpi and freebsd.
-
-#### Attention
-If no add-on definitions could be found, the buildsystem assumes that the bootstrapping of the add-on definition repositories hasn't been performed yet and automatically executes the add-on bootstrapping buildsystem located in the *bootstrap* sub-directory with the default settings (i.e. *all* add-ons from all pre-defined add-on definition repositories are bootstrapped into the directory pointed to by the *ADDONS_DEFINITION_DIR* option).
-
-## Buildsystem variables
-The buildsystem uses the following variables (which can be passed into it when executing cmake with the -D`<variable-name>=<value>` format) to manipulate the build process:
-- `ADDONS_TO_BUILD` has two variations, which are tested in order:
-     - a quoted, space delimited list of `<addon-id>s` that you want to build (default is *all*)
-     - a regular expression that every `<addon-id>` is matched against (e.g. `ADDONS_TO_BUILD="pvr.*"`) to build all pvr add-ons
-- `ADDONS_DEFINITION_DIR` points to the directory containing the definitions for the addons to be built
-- `ADDON_SRC_PREFIX` can be used to override the add-on repository location. It must point to the locally available parent directory of the add-on(s) to build. `<addon-id>` will be appended to this path automatically
-- `CMAKE_BUILD_TYPE` specifies the type of the build. This can be either *Debug* or *Release* (default is *Release*)
-- `CMAKE_INSTALL_PREFIX` points to the directory where the built add-ons and their additional files (addon.xml, resources, ...) will be installed to (defaults to `<ADDON_DEPENDS_PATH>`)
-- `CMAKE_TOOLCHAIN_FILE` can be used to pass a toolchain file into the add-on builds
-- `ADDON_DEPENDS_PATH` points to the directory containing the *include* and *lib* directories of the add-ons' dependencies.
-- `CORE_SOURCE_DIR` points to the root directory of the project (default is the absolute representation of ../../.. starting from this directory)
-- `BUILD_DIR` points to the directory where the add-ons and their dependencies will be downloaded and built
-- `PACKAGE_ZIP=ON` means that the add-ons will be 'packaged' into a common folder, rather than being placed in `<CMAKE_INSTALL_PREFIX>/lib/kodi/addons` and `<CMAKE_INSTALL_PREFIX>/share/kodi/addons`
-- `PACKAGE_DIR` points to the directory where the ZIP archived add-ons will be stored after they have been packaged (defaults to `<BUILD_DIR>/zips`)
-- `ARCH_DEFINES` specifies the platform-specific C/C++ preprocessor defines (defaults to empty)
-- `ADDON_TARBALL_CACHING` specifies whether downloaded add-on source tarballs should be cached or not (defaults to *ON*)
-
-## Deprecated buildsystem variables
-Buildsystem will print a warning if you use any of the below-listed variables. For now they still work but you should adapt your workflow to the new variables.
-- `APP_ROOT` - Use `CORE_SOURCE_DIR` instead
-
-## Building
-The buildsystem makes some assumptions about the environment which must be met by whoever uses it:
-- Any dependencies of the add-ons must already be built and their include and library files must be present in the path pointed to by `<CMAKE_PREFIX_PATH>` (in *include* and *lib* sub-directories)
-
-To trigger the cmake-based buildsystem the following command must be executed with `<path>` set to this directory (absolute or relative) allowing for in-source and out-of-source builds
-
-`cmake <path> -G <generator>`
-
-CMake supports multiple generators. See [here] (https://cmake.org/cmake/help/v3.1/manual/cmake-generators.7.html) for a list.
-
-In case of additional options the call might look like this:
-
-cmake `<path>` [-G `<generator>`] \  
-      -DCMAKE_BUILD_TYPE=Release \  
-      -DCORE_SOURCE_DIR="`<path-to-app-root>`" \  
-      -DARCH_DEFINES="-DTARGET_LINUX" \  
-      -DADDON_DEPENDS_PATH=`<path-to-built-depends>` \  
-      -DCMAKE_INSTALL_PREFIX="`<path-to-install-directory`"
diff --git a/project/cmake/addons/addons/pvr.dvbviewer/platforms.txt b/project/cmake/addons/addons/pvr.dvbviewer/platforms.txt
deleted file mode 100644
index baa6044..0000000
--- a/project/cmake/addons/addons/pvr.dvbviewer/platforms.txt
+++ /dev/null
@@ -1 +0,0 @@
-all
\ No newline at end of file
diff --git a/project/cmake/addons/addons/pvr.dvbviewer/pvr.dvbviewer.txt b/project/cmake/addons/addons/pvr.dvbviewer/pvr.dvbviewer.txt
deleted file mode 100644
index db25aa2..0000000
--- a/project/cmake/addons/addons/pvr.dvbviewer/pvr.dvbviewer.txt
+++ /dev/null
@@ -1 +0,0 @@
-pvr.dvbviewer https://github.com/manuelm/pvr.dvbviewer master
\ No newline at end of file
diff --git a/project/cmake/addons/bootstrap/Bootstrap.cmake b/project/cmake/addons/bootstrap/Bootstrap.cmake
deleted file mode 100644
index 5d20302..0000000
--- a/project/cmake/addons/bootstrap/Bootstrap.cmake
+++ /dev/null
@@ -1,39 +0,0 @@
-list(APPEND CMAKE_MODULE_PATH ${PROJECT_SOURCE_DIR})
-
-# make sure that the installation location has been specified
-if(NOT CMAKE_INSTALL_PREFIX)
-  message(FATAL_ERROR "CMAKE_INSTALL_PREFIX has not been specified")
-endif()
-
-# figure out which addons to bootstrap (defaults to all)
-if(NOT ADDONS_TO_BUILD)
-  set(ADDONS_TO_BUILD "all")
-else()
-  string(STRIP "${ADDONS_TO_BUILD}" ADDONS_TO_BUILD)
-  message(STATUS "Bootstrapping following addons: ${ADDONS_TO_BUILD}")
-  string(REPLACE " " ";" ADDONS_TO_BUILD ${ADDONS_TO_BUILD})
-endif()
-
-# find all addon definitions and go through them
-file(GLOB_RECURSE ADDON_DEFINITIONS ${PROJECT_SOURCE_DIR}/*.txt)
-foreach(ADDON_DEFINITION_FILE ${ADDON_DEFINITIONS})
-  # ignore platforms.txt
-  if(NOT (ADDON_DEFINITION_FILE MATCHES platforms.txt))
-    # read the addon definition file
-    file(STRINGS ${ADDON_DEFINITION_FILE} ADDON_DEFINITION)
-    string(REPLACE " " ";" ADDON_DEFINITION ${ADDON_DEFINITION})
-
-    # extract the addon definition's identifier
-    list(GET ADDON_DEFINITION 0 ADDON_ID)
-
-    # check if the addon definition should be built
-    if(ADDON_ID MATCHES "^${ADDONS_TO_BUILD}" OR ADDONS_TO_BUILD STREQUAL all)
-      # get the path to the addon definition directory
-      get_filename_component(ADDON_DEFINITION_DIR ${ADDON_DEFINITION_FILE} DIRECTORY)
-
-      # install the addon definition
-      message(STATUS "Bootstrapping ${ADDON_ID} addon...")
-      file(INSTALL ${ADDON_DEFINITION_DIR} DESTINATION ${CMAKE_INSTALL_PREFIX})
-    endif()
-  endif()
-endforeach()
diff --git a/project/cmake/addons/bootstrap/CMakeLists.txt b/project/cmake/addons/bootstrap/CMakeLists.txt
deleted file mode 100644
index c20b97e..0000000
--- a/project/cmake/addons/bootstrap/CMakeLists.txt
+++ /dev/null
@@ -1,94 +0,0 @@
-cmake_minimum_required(VERSION 3.1)
-project(kodi-addons-bootstrap)
-
-list(APPEND CMAKE_MODULE_PATH ${PROJECT_SOURCE_DIR})
-
-# make sure CMAKE_INSTALL_PREFIX is properly set
-if(CMAKE_INSTALL_PREFIX_INITIALIZED_TO_DEFAULT OR NOT CMAKE_INSTALL_PREFIX)
-  set(CMAKE_INSTALL_PREFIX "${PROJECT_SOURCE_DIR}/../addons")
-endif()
-list(APPEND CMAKE_PREFIX_PATH ${CMAKE_INSTALL_PREFIX})
-
-# figure out where the build directory is located
-if(NOT BUILD_DIR)
-  set(BUILD_DIR "${CMAKE_BINARY_DIR}/build")
-else()
-  file(TO_CMAKE_PATH "${BUILD_DIR}" BUILD_DIR)
-endif()
-get_filename_component(BUILD_DIR "${BUILD_DIR}" ABSOLUTE)
-
-# make sure that the repositories to build have been specified
-if(NOT REPOSITORY_TO_BUILD)
-  set(REPOSITORY_TO_BUILD_DEFAULT ON)
-  set(REPOSITORY_TO_BUILD "all")
-  set(REPOSITORY_REVISION "")
-  message(STATUS "Bootstrapping all repositories")
-else()
-  set(REPOSITORY_TO_BUILD_DEFAULT OFF)
-  message(STATUS "Bootstrapping following repository: ${REPOSITORY_TO_BUILD}")
-endif()
-
-# figure out which addons to bootstrap (defaults to all)
-if(NOT ADDONS_TO_BUILD)
-  set(ADDONS_TO_BUILD "all")
-  message(STATUS "Bootstrapping all addons")
-else()
-  message(STATUS "Bootstrapping following addons: ${ADDONS_TO_BUILD}")
-endif()
-
-include(ExternalProject)
-
-function(bootstrap_repo repo_id repo_url repo_revision)
-  message(STATUS "Bootstrapping addons from ${repo_id} (${repo_url} ${repo_revision})...")
-  externalproject_add(${repo_id}
-                      GIT_REPOSITORY ${repo_url}
-                      GIT_TAG ${repo_revision}
-                      PREFIX ${BUILD_DIR}/${repo_id}
-                      CONFIGURE_COMMAND ""
-                      BUILD_COMMAND ""
-                      INSTALL_COMMAND ${CMAKE_COMMAND}
-                                      -DCMAKE_PREFIX_PATH=${CMAKE_PREFIX_PATH}
-                                      -DPROJECT_SOURCE_DIR=<SOURCE_DIR>
-                                      -DCMAKE_INSTALL_PREFIX=${CMAKE_INSTALL_PREFIX}
-                                      -DADDONS_TO_BUILD=${ADDONS_TO_BUILD}
-                                      -P ${PROJECT_SOURCE_DIR}/Bootstrap.cmake
-                      )
-endfunction()
-
-# look for all addons repository definitions
-set(REPOSITORY_TO_BUILD_FOUND OFF)
-file(GLOB repos repositories/*.txt)
-foreach(repo ${repos})
-  file(STRINGS ${repo} repo_definition)
-  string(REPLACE " " ";" repo_definition ${repo_definition})
-  list(GET repo_definition 0 repo_id)
-
-  list(FIND REPOSITORY_TO_BUILD ${repo_id} idx)
-  if(idx GREATER -1 OR REPOSITORY_TO_BUILD STREQUAL "all")
-    set(REPOSITORY_TO_BUILD_FOUND ON)
-
-    # get the URL of the repository
-    list(GET repo_definition 1 repo_url)
-
-    # get the revision of the repository if not provided as an argument
-    if(NOT REPOSITORY_REVISION)
-      list(GET repo_definition 2 repo_revision)
-    else()
-      set(repo_revision "${REPOSITORY_REVISION}")
-    endif()
-
-    bootstrap_repo(${repo_id} ${repo_url} ${repo_revision})
-  endif()
-endforeach()
-
-# if we have been asked to bootstrap a specific repository (not the default one) and
-# it couldn't be found in the predefined repository definitions we assume that it's a
-# URL to a specific repository
-if(NOT REPOSITORY_TO_BUILD_DEFAULT AND NOT REPOSITORY_TO_BUILD_FOUND)
-  # default to the master branch if no revision has been provided
-  if(NOT REPOSITORY_REVISION)
-    set(REPOSITORY_REVISION "master")
-  endif()
-
-  bootstrap_repo(binary-addons-custom ${REPOSITORY_TO_BUILD} ${REPOSITORY_REVISION})
-endif()
diff --git a/project/cmake/addons/bootstrap/README.md b/project/cmake/addons/bootstrap/README.md
deleted file mode 100644
index b886b5b..0000000
--- a/project/cmake/addons/bootstrap/README.md
+++ /dev/null
@@ -1,48 +0,0 @@
-# KODI ADDON DEFINITIONS BOOTSTRAPPING
-This directory contains the cmake-based buildsystem for addon definitions
-bootstrapping which downloads the addon definitions from one or more addon
-definitions repositories. These addon definitions are then used by the addon
-buildsystem to figure out which addons and which versions to build. It looks
-into the "repositories" sub-directory and parses all *.txt files recursively.
-Each addon definitions repository must have its own <repository>.txt file which
-must follow the following defined format:
-```
-<repository> <git-url> <git-revision>
-```
-where
-* `<repository>` is the identification of the repository.
-* `<git-url>` must be the URL of the git repository containing the addon
-    definitions
-* `<git-revision>` must be a valid git tag/branch/commit in the addon
-    definitions repository's git repository which will be used for the build
-
-The buildsystem uses the following variables (which can be passed into it when
-executing cmake with the `-D<variable-name>=<value>` option):
-* `CMAKE_INSTALL_PREFIX` points to the directory where the downloaded addon
-definitions will be installed to (defaults to `../addons`).
-* `BUILD_DIR` points to the directory where the addon definitions repositories
-will be downloaded to.
-* `REPOSITORY_TO_BUILD` specifies a single addon definitions repository to be
-downloaded and processed (defaults to `"all"`).
-* `REPOSITORY_REVISION` specifies the git revision in the addon definitions
-repository which will be used for the build. This option is only valid in
-combination with the `REPOSITORY_TO_BUILD` option (defaults to the git
-revision specified in the repository's definition file).
-* `ADDONS_TO_BUILD` is a quoted, space delimited list of `<addon-id>`s that
-should be bootstrapped (default is `"all"`).
-
-To trigger the cmake-based buildsystem the following command must be executed
-with <path> being the path to this directory (absolute or relative, allowing for
-in-source and out-of-source builds).
-```
-cmake <path> -G <generator>
-```
-
-cmake supports multiple generators, see
-http://www.cmake.org/cmake/help/v2.8.8/cmake.html#section_Generators for a list.
-
-In case of additional options the call might look like this
-```
-cmake <path> [-G <generator>] \
-      -DCMAKE_INSTALL_PREFIX="<path-to-install-directory>"
-```
\ No newline at end of file
diff --git a/project/cmake/addons/bootstrap/repositories/binary-addons.txt b/project/cmake/addons/bootstrap/repositories/binary-addons.txt
deleted file mode 100644
index 8674f06..0000000
--- a/project/cmake/addons/bootstrap/repositories/binary-addons.txt
+++ /dev/null
@@ -1 +0,0 @@
-binary-addons https://github.com/xbmc/repo-binary-addons.git master
\ No newline at end of file
diff --git a/project/cmake/addons/depends/CMakeLists.txt b/project/cmake/addons/depends/CMakeLists.txt
deleted file mode 100644
index 622701d..0000000
--- a/project/cmake/addons/depends/CMakeLists.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-cmake_minimum_required(VERSION 3.1)
-project(kodi-addons-depends)
-
-list(APPEND CMAKE_MODULE_PATH ${PROJECT_SOURCE_DIR})
-
-if(NOT CMAKE_BUILD_TYPE)
-  set(CMAKE_BUILD_TYPE Release)
-endif()
-
-if(NOT CORE_SYSTEM_NAME)
-  string(TOLOWER ${CMAKE_SYSTEM_NAME} CORE_SYSTEM_NAME)
-endif()
-
-include(ExternalProject)
-
-if(NOT ADDON_DEPENDS_PATH)
-  set(ADDON_DEPENDS_PATH ${PROJECT_SOURCE_DIR}/../build/depends)
-else()
-  file(TO_CMAKE_PATH "${ADDON_DEPENDS_PATH}" ADDON_DEPENDS_PATH)
-endif()
-get_filename_component(ADDON_DEPENDS_PATH "${ADDON_DEPENDS_PATH}" ABSOLUTE)
-list(APPEND CMAKE_PREFIX_PATH ${ADDON_DEPENDS_PATH})
-
-if(NOT BUILD_DIR)
-    set(BUILD_DIR "${CMAKE_BINARY_DIR}/build")
-else()
-  file(TO_CMAKE_PATH "${BUILD_DIR}" BUILD_DIR)
-endif()
-get_filename_component(BUILD_DIR "${BUILD_DIR}" ABSOLUTE)
-
-## use add_addon_depends to handle the cmake based dependencies
-include(${CORE_SOURCE_DIR}/project/cmake/scripts/common/HandleDepends.cmake)
-add_addon_depends(depends "${PROJECT_SOURCE_DIR}")
-
-## if there's a platform-specific sub-directory containing a CMakeLists.txt, add it to the build as well
-if(EXISTS ${PROJECT_SOURCE_DIR}/${CORE_SYSTEM_NAME}/CMakeLists.txt)
-  message(STATUS "Processing ${CORE_SYSTEM_NAME}")
-  add_subdirectory(${CORE_SYSTEM_NAME})
-else()
-  message(STATUS "No platform specific file ${PROJECT_SOURCE_DIR}/${CORE_SYSTEM_NAME}/CMakeLists.txt found")
-endif()
diff --git a/project/cmake/addons/depends/README b/project/cmake/addons/depends/README
deleted file mode 100644
index 584a167..0000000
--- a/project/cmake/addons/depends/README
+++ /dev/null
@@ -1,61 +0,0 @@
-KODI ADDON DEPENDENCIES
-=======================
-This directory contains the cmake-based buildsystem for addon dependencies. It
-looks into the "common" and the "<platform>/cmake" sub-directories and parses
-all *.txt files recursively. Each dependency must have its own <dependency>.txt
-file (either in the main sub-directory or in a separate subdirectory of the main
-subdirectory) which must follow one of the defined formats:
-  * an empty file means that no extra downloads are necessary
-  * <dependency>
-  * <dependency> <url>
-  * <dependency> <git-url> <git-revision>
-where
-  * <dependency> must be identical to the filename
-  * <url> must be the URL to an archive that is downloaded and extracted.
-  * <git-url> must be the URL of the git repository containing the
-    dependency.
-  * <git-revision> must be a valid git tag/branch/commit in the dependency's git
-    repository which will be used for the build.
-
-Reserved filenames (for additional information on how to build a dependency)
-are:
-  * CMakeLists.txt: build instructions for the dependency
-  * install.txt: instructions on how to install the dependency's built files
-  * noinstall.txt: no installation step required (content is ignored)
-  * flags.txt: additional build flags
-  * deps.txt: whitespace separated list of dependencies of this dependency
-
-The buildsystem uses the following variables (which can be passed into it when
-executing cmake with the -D<variable-name>=<value> option) to e.g. access
-specific paths:
-  * CMAKE_BUILD_TYPE specifies the type of the build. This can be either "Debug"
-    or "Release" (default is "Release").
-  * CMAKE_TOOLCHAIN_FILE can be used to pass a toolchain file into the add-on
-    builds.
-  * CORE_SYSTEM_NAME is the name of the platform (e.g. "linux" or "android") in
-    lower-case (defaults to lowercase(CMAKE_SYSTEM_NAME)).
-  * CORE_SOURCE_DIR points to the root directory of the project (default is the
-    absolute representation of ../../.. starting from this directory).
-  * ADDON_DEPENDS_PATH points to the directory where the built dependencies
-    (their include and library file) will be installed to.
-  * ARCH_DEFINES specifies the platform-specific C/C++ preprocessor defines
-    (defaults to empty).
-  * DEPENDS_TO_BUILD is a quoted, space delimited list of <dependency>s that
-    you want to build (default is "all").
-
-To trigger the cmake-based buildsystem the following command must be executed
-with <path> being the path to this directory (absolute or relative, allowing for
-in-source and out-of-source builds).
-
-  cmake <path> -G <generator>
-
-cmake supports multiple generators, see
-http://www.cmake.org/cmake/help/v2.8.8/cmake.html#section_Generators for a list.
-
-In case of additional options the call might look like this
-
-  cmake <path> [-G <generator>] \
-        -DCMAKE_BUILD_TYPE=Release \
-        -DCORE_SOURCE_DIR="<path-to-project-root>" \
-        -DARCH_DEFINES="-DTARGET_LINUX" \
-        -DCMAKE_INSTALL_PREFIX="<path-to-install-directory"
diff --git a/project/cmake/addons/depends/common/kodi-platform/deps.txt b/project/cmake/addons/depends/common/kodi-platform/deps.txt
deleted file mode 100644
index b953815..0000000
--- a/project/cmake/addons/depends/common/kodi-platform/deps.txt
+++ /dev/null
@@ -1,2 +0,0 @@
-tinyxml
-p8-platform
diff --git a/project/cmake/addons/depends/common/kodi-platform/kodi-platform.txt b/project/cmake/addons/depends/common/kodi-platform/kodi-platform.txt
deleted file mode 100644
index 46ef93c..0000000
--- a/project/cmake/addons/depends/common/kodi-platform/kodi-platform.txt
+++ /dev/null
@@ -1 +0,0 @@
-kodi-platform https://github.com/xbmc/kodi-platform c8188d82678fec6b784597db69a68e74ff4986b5
diff --git a/project/cmake/addons/depends/common/p8-platform/p8-platform.txt b/project/cmake/addons/depends/common/p8-platform/p8-platform.txt
deleted file mode 100644
index 7db4e36..0000000
--- a/project/cmake/addons/depends/common/p8-platform/p8-platform.txt
+++ /dev/null
@@ -1 +0,0 @@
-p8-platform https://github.com/Pulse-Eight/platform.git 38343e0acd6a636ac46139aa666aee4a8d1f13db
diff --git a/project/cmake/addons/depends/common/tinyxml/CMakeLists.txt b/project/cmake/addons/depends/common/tinyxml/CMakeLists.txt
deleted file mode 100644
index ec396ee..0000000
--- a/project/cmake/addons/depends/common/tinyxml/CMakeLists.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-cmake_minimum_required(VERSION 3.1)
-project(tinyxml)
-
-set(SOURCES src/tinystr.cpp
-            src/tinyxml.cpp
-            src/tinyxmlerror.cpp
-            src/tinyxmlparser.cpp)
-
-if(WIN32)
-  add_definitions(-DWIN32 -D_LIB)
-endif()
-add_definitions(-DTIXML_USE_STL)
-
-add_library(tinyxml ${SOURCES})
-
-include_directories(${PROJECT_SOURCE_DIR}/include)
-
-set(HEADERS ${PROJECT_SOURCE_DIR}/include/tinystr.h
-            ${PROJECT_SOURCE_DIR}/include/tinyxml.h)
-
-install(FILES ${HEADERS} DESTINATION ${CMAKE_INSTALL_PREFIX}/include)
-install(TARGETS tinyxml DESTINATION ${CMAKE_INSTALL_PREFIX}/lib)
diff --git a/project/cmake/addons/depends/common/tinyxml/tinyxml.txt b/project/cmake/addons/depends/common/tinyxml/tinyxml.txt
deleted file mode 100644
index f8e05e8..0000000
--- a/project/cmake/addons/depends/common/tinyxml/tinyxml.txt
+++ /dev/null
@@ -1 +0,0 @@
-tinyxml http://mirrors.kodi.tv/build-deps/sources/tinyxml-2.6.2_2.tar.gz
diff --git a/project/cmake/addons/depends/windows/CMakeLists.txt b/project/cmake/addons/depends/windows/CMakeLists.txt
deleted file mode 100644
index c8739c0..0000000
--- a/project/cmake/addons/depends/windows/CMakeLists.txt
+++ /dev/null
@@ -1,52 +0,0 @@
-cmake_minimum_required(VERSION 3.1)
-project(kodi-addons-depends-windows)
-
-list(APPEND CMAKE_MODULE_PATH ${PROJECT_SOURCE_DIR})
-
-if(NOT CMAKE_BUILD_TYPE)
-  set(CMAKE_BUILD_TYPE Release)
-endif()
-
-include(ExternalProject)
-
-if(NOT ADDON_DEPENDS_PATH)
-  message(FATAL_ERROR "ADDON_DEPENDS_PATH (${ADDON_DEPENDS_PATH}) is not a valid target directory.")
-else()
-  file(TO_CMAKE_PATH "${ADDON_DEPENDS_PATH}" ADDON_DEPENDS_PATH)
-endif()
-get_filename_component(ADDON_DEPENDS_PATH "${ADDON_DEPENDS_PATH}" ABSOLUTE)
-list(APPEND CMAKE_PREFIX_PATH ${ADDON_DEPENDS_PATH})
-
-if(NOT DEPENDS_TO_BUILD)
-  set(DEPENDS_TO_BUILD "all")
-endif()
-
-function(add_internal id url inputfile)
-  externalproject_add(${id}
-                      URL ${url}
-                      PREFIX build/${id}
-                      CONFIGURE_COMMAND ""
-                      BUILD_COMMAND ""
-                      INSTALL_COMMAND ${CMAKE_COMMAND}
-                                      -DINPUTDIR=${PROJECT_BINARY_DIR}/build/${id}/src/${id}
-                                      -DINPUTFILE=${inputfile}
-                                      -DDESTDIR=${ADDON_DEPENDS_PATH}
-                                      -P ${PROJECT_SOURCE_DIR}/Install.cmake
-                     )
-endfunction()
-
-file(GLOB_RECURSE download_input_files prebuilt/*.txt)
-foreach(file ${download_input_files})
-  if(NOT file MATCHES install.txt)
-    file(STRINGS ${file} def)
-    get_filename_component(dir ${file} DIRECTORY)
-    string(REPLACE " " ";" def ${def})
-    list(GET def 0 id)
-
-    list(FIND DEPENDS_TO_BUILD ${id} idx)
-    if(idx GREATER -1 OR DEPENDS_TO_BUILD STREQUAL "all")
-      list(GET def 1 url)
-      add_internal(${id} ${url} ${dir}/install.txt)
-    endif()
-  endif()
-endforeach()
diff --git a/project/cmake/addons/depends/windows/Install.cmake b/project/cmake/addons/depends/windows/Install.cmake
deleted file mode 100644
index 9a3adbb..0000000
--- a/project/cmake/addons/depends/windows/Install.cmake
+++ /dev/null
@@ -1,24 +0,0 @@
-if(EXISTS "${INPUTFILE}")
-  # if there's an input file we use it to determine which files to copy where
-  file(STRINGS ${INPUTFILE} FILES)
-  string(REPLACE "\n" ";" FILES "${FILES}")
-  foreach(file ${FILES})
-    string(REPLACE " " ";" file "${file}")
-    list(GET file 0 dir)
-    list(GET file 1 dest)
-    list(LENGTH file deflength)
-    if(deflength GREATER 2)
-      list(GET file 2 copy)
-    endif()
-    file(GLOB files ${INPUTDIR}/${dir})
-    foreach(instfile ${files})
-      file(COPY ${instfile} DESTINATION ${DESTDIR}/${dest})
-      if(copy)
-        file(COPY ${instfile} DESTINATION ${DESTDIR}/${copy})
-      endif()
-    endforeach()
-  endforeach()
-else()
-  # otherwise we assume that the content of the extracted archive is already well-formed and can just be copied
-  file(COPY ${INPUTDIR}/${dir} DESTINATION ${DESTDIR})
-endif()
\ No newline at end of file
diff --git a/project/cmake/addons/depends/windows/README b/project/cmake/addons/depends/windows/README
deleted file mode 100644
index 67dc594..0000000
--- a/project/cmake/addons/depends/windows/README
+++ /dev/null
@@ -1,19 +0,0 @@
-KODI WIN32 ADDON DEPENDENCIES
-=============================
-This directory contains the cmake-based buildsystem for dependencies (currently
-only prebuilt) used by one or multiple addons. The buildsystem looks into the
-"prebuilt" sub-directory, downloads all the specified dependencies, extracts
-them and places them into the "depends" sub-directory.
-
-To trigger the cmake-based buildsystem the following command must be executed
-with <path> being the path to this directory (absolute or relative, allowing for
-in-source and out-of-source builds).
-
-  cmake <path> [-G <generator>]
-
-cmake supports multiple generators, see
-http://www.cmake.org/cmake/help/v2.8.8/cmake.html#section_Generators for a list.
-For win32 builds one of the "Visual Studio XX" or the "NMake Makefiles"
-generators is preferred. For the "NMake Makefiles" generator to work the above
-command must be called from an environment prepared for VC++ builds (see
-http://msdn.microsoft.com/en-us/library/f2ccy3wt.aspx).
diff --git a/project/cmake/addons/depends/windows/cmake/mingw/CMakeLists.txt b/project/cmake/addons/depends/windows/cmake/mingw/CMakeLists.txt
deleted file mode 100644
index 2c2c4b8..0000000
--- a/project/cmake/addons/depends/windows/cmake/mingw/CMakeLists.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-cmake_minimum_required(VERSION 3.1)
-project(mingw)
-
-function(generate_mingw32_wrapper cmd)
-  set(CMD ${cmd})
-  configure_file(${PROJECT_SOURCE_DIR}/mingw32-cmd.bat.in ${MINGW_PATH}/bin/${CMD}.bat @ONLY)
-endfunction()
-
-get_filename_component(CORE_SOURCE_DIR ${PROJECT_SOURCE_DIR}/../../../../../../.. REALPATH)
-
-set(MSYS_PATH "${CORE_SOURCE_DIR}/project/BuildDependencies/msys64")
-set(MINGW_PATH "${MSYS_PATH}/mingw32")
-
-# configure the MinGW toolchain file
-configure_file(${PROJECT_SOURCE_DIR}/Toolchain_mingw32.cmake.in ${CMAKE_INSTALL_PREFIX}/Toolchain_mingw32.cmake @ONLY)
-
-# configure MinGWConfig.cmake
-configure_file(${PROJECT_SOURCE_DIR}/MinGWConfig.cmake.in ${CMAKE_INSTALL_PREFIX}/MinGWConfig.cmake)
-
-# TODO: MinGW GCC 5.3.0-1 comes without cc.exe, Remove this once package is bumped to 5.3.0-p2
-# See https://github.com/Alexpux/MINGW-packages/pull/1034
-if(NOT EXISTS ${MINGW_PATH}/bin/cc.exe)
-  execute_process(COMMAND ${CMAKE_COMMAND} -E copy ${MINGW_PATH}/bin/gcc.exe ${MINGW_PATH}/bin/cc.exe)
-endif()
-
-# configure the MinGW wrapper batch scripts
-generate_mingw32_wrapper("make")
-generate_mingw32_wrapper("gcc")
-generate_mingw32_wrapper("cc")
-generate_mingw32_wrapper("g++")
-generate_mingw32_wrapper("ar")
-generate_mingw32_wrapper("ld")
-generate_mingw32_wrapper("windres")
diff --git a/project/cmake/addons/depends/windows/cmake/mingw/MinGWConfig.cmake.in b/project/cmake/addons/depends/windows/cmake/mingw/MinGWConfig.cmake.in
deleted file mode 100644
index 2d6baa7..0000000
--- a/project/cmake/addons/depends/windows/cmake/mingw/MinGWConfig.cmake.in
+++ /dev/null
@@ -1,3 +0,0 @@
-set(MINGW_INCLUDE_DIRS @MINGW_PATH@/include)
-set(MINGW_MAKE @MINGW_PATH@/bin/make.bat -j$ENV{NUMBER_OF_PROCESSORS})
-set(MINGW_FOUND 1)
diff --git a/project/cmake/addons/depends/windows/cmake/mingw/Toolchain_mingw32.cmake.in b/project/cmake/addons/depends/windows/cmake/mingw/Toolchain_mingw32.cmake.in
deleted file mode 100644
index 01d281d..0000000
--- a/project/cmake/addons/depends/windows/cmake/mingw/Toolchain_mingw32.cmake.in
+++ /dev/null
@@ -1,17 +0,0 @@
-set(CMAKE_SYSTEM_VERSION 1)
-set(CMAKE_SYSTEM_NAME Windows)
-
-set(CMAKE_FIND_ROOT_PATH @CMAKE_FIND_ROOT_PATH@ @CMAKE_INSTALL_PREFIX@ @MSYS_PATH@ @MINGW_PATH@)
-
-# specify the cross compiler
-set(CMAKE_C_COMPILER   @MINGW_PATH@/bin/gcc.bat)
-set(CMAKE_CXX_COMPILER @MINGW_PATH@/bin/g++.bat)
-set(CMAKE_AR           @MINGW_PATH@/bin/ar.bat CACHE FILEPATH "Archiver")
-set(CMAKE_LINKER       @MINGW_PATH@/bin/ld.bat CACHE FILEPATH "Linker")
-SET(CMAKE_RC_COMPILER  @MINGW_PATH@/bin/windres.bat)
-
-# search for programs in the build host directories
-set(CMAKE_FIND_ROOT_PATH_MODE_PROGRAM NEVER)
-# for libraries and headers in the target directories
-set(CMAKE_FIND_ROOT_PATH_MODE_LIBRARY ONLY)
-set(CMAKE_FIND_ROOT_PATH_MODE_INCLUDE ONLY)
diff --git a/project/cmake/addons/depends/windows/cmake/mingw/mingw.txt b/project/cmake/addons/depends/windows/cmake/mingw/mingw.txt
deleted file mode 100644
index 90aa6ae..0000000
--- a/project/cmake/addons/depends/windows/cmake/mingw/mingw.txt
+++ /dev/null
@@ -1 +0,0 @@
-mingw
diff --git a/project/cmake/addons/depends/windows/cmake/mingw/mingw32-cmd.bat.in b/project/cmake/addons/depends/windows/cmake/mingw/mingw32-cmd.bat.in
deleted file mode 100644
index 44a0ea2..0000000
--- a/project/cmake/addons/depends/windows/cmake/mingw/mingw32-cmd.bat.in
+++ /dev/null
@@ -1,6 +0,0 @@
-@ECHO OFF
-SETLOCAL
-
-SET PATH=@MINGW_PATH@/bin;@MSYS_PATH@/usr/bin;%PATH%
-@CMD@.exe %*
-
diff --git a/project/cmake/addons/depends/windows/cmake/mingw/noinstall.txt b/project/cmake/addons/depends/windows/cmake/mingw/noinstall.txt
deleted file mode 100644
index e69de29..0000000
--- a/project/cmake/addons/depends/windows/cmake/mingw/noinstall.txt
+++ /dev/null
diff --git a/project/cmake/addons/depends/windows/cmake/msys/CMakeLists.txt b/project/cmake/addons/depends/windows/cmake/msys/CMakeLists.txt
deleted file mode 100644
index 1c0536e..0000000
--- a/project/cmake/addons/depends/windows/cmake/msys/CMakeLists.txt
+++ /dev/null
@@ -1,5 +0,0 @@
-cmake_minimum_required(VERSION 3.1)
-project(msys LANGUAGES NONE)
-
-# This is an empty dummy dependency because a lot of game addons depend on it.
-# After they got fixed, this can be removed.
diff --git a/project/cmake/addons/depends/windows/cmake/msys/msys.txt b/project/cmake/addons/depends/windows/cmake/msys/msys.txt
deleted file mode 100644
index 00de9c2..0000000
--- a/project/cmake/addons/depends/windows/cmake/msys/msys.txt
+++ /dev/null
@@ -1 +0,0 @@
-msys
diff --git a/project/cmake/addons/depends/windows/cmake/msys/noinstall.txt b/project/cmake/addons/depends/windows/cmake/msys/noinstall.txt
deleted file mode 100644
index e69de29..0000000
--- a/project/cmake/addons/depends/windows/cmake/msys/noinstall.txt
+++ /dev/null
diff --git a/project/cmake/addons/depends/windows/prebuilt/README b/project/cmake/addons/depends/windows/prebuilt/README
deleted file mode 100644
index a0c70d6..0000000
--- a/project/cmake/addons/depends/windows/prebuilt/README
+++ /dev/null
@@ -1,21 +0,0 @@
-KODI WIN32 PREBUILT ADDON DEPENDENCIES
-======================================
-This directory contains a file or sub-directory for every prebuilt dependency
-used by one of the addons being built. There are two different modes supported.
-Both include a file named <library-id>.txt which must follow the defined format
-  <library-id> <download-url>
-
-If the archive, which the <download-url> points at, contains
- * only the necessary files and in the proper directory structure (i.e. an
-   "include" and a "lib" directory) then the file must be put into this
-   directory and nothing else is needed.
- * unnecessary files and/or does not follow the defined directory structure
-   (i.e. an "include" and a "lib" directory) then the file must be put into a
-   sub-directory named <library-id>. Furthermore an additional file called
-   "install.txt" must be placed in that sub-directory. install.txt contains a
-   line for every path/directory/file with a destination where it must be copied
-   to. It must follow the defined format
-     <source> <destination> [<copy-destination>]
-   where <source> must be an existing file, directory or a path containing
-   wildcards, <destination> and the optional <copy-destination> must be existing
-   directories.