1 files changed, 29 insertions, 4 deletions

diff --git a/esphome/config/printerswitch.yaml b/esphome/config/printerswitch.yaml
index 55ca307..9b31c94 100644
--- a/esphome/config/printerswitch.yaml
+++ b/esphome/config/printerswitch.yaml
@@ -17,7 +17,6 @@ esp8266:
 logger:
   # make RXD / TXD available
   baud_rate: 0
-  level: DEBUG
 
 # Enable Home Assistant API
 api:
@@ -49,7 +48,7 @@ binary_sensor:
     name: "Button"
     device_class: power
     pin:
-      number: GPIO01
+      number: GPIO1
       inverted: true
     on_press:
       - switch.toggle: relay
@@ -59,8 +58,8 @@ sensor:
   - platform: hlw8012
     model: BL0937
     sel_pin: GPIO12
-    cf_pin: GPIO04
-    cf1_pin: GPIO05
+    cf_pin: GPIO4
+    cf1_pin: GPIO5
     current_resistor: ${current_resistor}
     voltage_divider: ${voltage_divider}
     voltage:
@@ -159,6 +158,32 @@ output:
     id: led
     pin: GPIO13
 
+  - platform: gpio
+    id: unused_gpio0
+    pin:
+      number: GPIO0
+      mode: INPUT_PULLUP
+  - platform: gpio
+    id: unused_gpio2
+    pin:
+      number: GPIO2
+      mode: INPUT_PULLUP
+  - platform: gpio
+    id: unused_gpio3
+    pin:
+      number: GPIO3
+      mode: INPUT_PULLUP
+  - platform: gpio
+    id: unused_gpio15
+    pin:
+      number: GPIO15
+      mode: INPUT_PULLUP
+  - platform: gpio
+    id: unused_gpio16
+    pin:
+      number: GPIO16
+      mode: INPUT_PULLDOWN
+
 interval:
   - interval: 10s
     then: